Earlier Bridge works

Construction of a new three span, two lane concrete bridge to replace the existing single lane timber bridge, demolition of the existing timber bridge, improvement of approaches and associated works.

Single span Pedestrian / Cycleway bridge over Guineas Creek Road, Elanora including bored piling.

The design (where required) supply and construction of a 78m long, four span bridge including 35 x 550 dia octagonal pile , piers, headstocks, abutments, prestressed concrete deck units, precast concrete kerb units, bridge railings, pedestrian balustrades, precast feature pillars and timber viewing platforms.

The design (where required) supply and construction of a 78m long, four span bridge including piled foundations, piers, headstocks, abutments, prestressed concrete deck units, precast concrete kerb units, bridge railings, pedestrian balustrades, precast feature pillars and timber viewing platforms.

Demolition of existing bridge and construction of a new 2 lane concrete bridge including 6 x 750 mm dia bored piles at Creek Road, Carindale.

Hurdle Creek Bridge on Canarvon Highway (Roma-Injune) 56.45 km north of Roma.  Widen existing 6.7m wide concrete bridge at Hurdle Creek to 8.6m width between kerbs.

Hutton Creek Bridge on Canarvon Highway (Injune-Rolleston) 15.34km north of Injune.  Widen existing 6.7m wide concrete bridge at Hutton Creek to 9.2m width between kerbs.

The construction of two reinforced concrete bridges being crossings 4 and 5 of Redbank Creek on the Esk - Hampton Road including associated roadworks at the approaches including earthworks, drainage, paving, bitumen surfacing and roadside furniture.

Works include the construction of a new two lane concrete bridge to replace the existing single lane timber bridge, demolition of the existing timber bridge, improvement of approaches and associated works.  The bridge construction is planned in two stages, the first stage being construction of a part of the bridge and the second stage being the completion of the bridge with traffic allowed on the already constructed part.

Design and construction of a single span bridge over Bald Hills Creek to replace the existing structure.  Construction will include bored piles, abutments, relieving slabs and installation of PSC deck units.

Construction of a single span, two lane replacement bridge over Chinghee Creek including installation of bored pile foundations and PSC deck units, approach roadworks and associated traffic control.

The bridge construction consisted of 11 concrete headstocks of which 6 were over water and 5 were on land.  All headstocks were formed in-situ and poured.  Forms for the headstocks were supported off the sacrificial steel pile liner.  Construction works for this project also included, supply and installation of pedestals and bearings, installation of all deck units (supplied by others), construction of decking slabs including installation of all reinforcement and jointing.  Construction of drainage structures on existing bridge at scupper location, including all preparation works , installation of balustrade (supplied by others) and construction of reliving slabs.

Rehabilitation and widening of 2nd Waterfall Gully Bridge including replacement of Abutment B with a Concrete abutment.